|
(Example) Walter-Helitronic 45 to 55 and GC 6 and GC 8, Hawemat 2000 & 3000:
After reconstruction, the drive control system will consist of:
An industrial PC with a Windows
XP professional operating system, as well as a floppy, DVD, USB und LAN
interface.
A control panel that is
standardized with a 19“ TFT Touch Screen.
A CNC control system Advantage
400, with PMac CNC/PLC part.
A interface circuit board for the on and
off outputs.
A Jokab Safety PLC to watch over the doors
in emergency situations and during set up.
A Copley Servo drive system for 4-8 axel
machines.
The old CNC control system includes a control panel and screen, as well as the
old PLC, a Servo drive system, the motor protection circuit breaker and the
wiring would be removed.
The A 400 controller is ISO NC programmed and a matching editor is also
installed on the controller, which is included in delivery.
For operator-friendly software options, we recommend the following:
Universal grinding program,
“G-Tool,” which works with machining tools. Upon request, on side training
can be provided.
Universal grinding program, “S-Tool,”
which works with saw blades with pointy and blunt teeth.
Diverse Program, based off of the old
original manufacturer’s program for the newly programmed Advantage 400.
Example: Sharp-edged cutter with corner radius or ball nose, standard and
step drill bits with various tips.
Universal Machining software, “Toolkit,”
from the MTS Company. This software works with 5-6 axel machines. We worked
with MTS to develop interfaces which not only allow for the installation and
function of the A 400, but also the measuring of tools with a measuring
sensor.
Upon request, it is also possible to
install other software.
|
||||||||||||||||||||||